Skip Navigation Links | Teledyne Marine | Products | Pressure Temperature Sensors
​​​​
Single Pressure and Temperature (PT) Sensor Series  ​ ​ ​
Product Code Maximum Pressure Rating Output Pressure Accuracy
PT10-C1 10kpsi CANbus 0.1% FS
PT10-C05 10kpsi CANbus 0.05% FS
PT10-C025 10kpsi CANbus 0.025​​​​​% FS
​ ​ ​ ​
PT10-M1 10kpsi MODbus 0.1% FS
PT10-M05 10kpsi MODbus 0.05% FS
PT10-M025 10kpsi MODbus 0.025% FS
​ ​ ​ ​
PT10-A1 10kpsi 4-20mA 0.1% FS
​ ​ ​ ​
PT15-C1 15kpsi CANbus 0.1% FS
PT15-C05 15kpsi CANbus 0.05% FS
PT15-C025 15kpsi CANbus 0.025% FS
​ ​ ​ ​
PT15-M1 15kpsi MODbus 0.1% FS
PT15-M05 15kpsi MODbus 0.05% FS
PT15-M025 15kpsi MODbus 0.025% FS
​ ​ ​ ​
PT15-A1 15kpsi 4-20mA 0.1% FS
​ ​ ​ ​
​ ​ ​ ​
Dual Pressure and Temperature (DPT) Sensor Series  ​ ​ ​
Product Code Maximum Pressure Rating Output Pressure Accuracy
DPT10-C1 10kpsi CANbus 0.1% FS
DPT10-C05 10kpsi CANbus 0.05% FS
DPT10-C025 10kpsi CANbus 0.025% FS
​ ​ ​ ​
DPT10-M1 10kpsi MODbus 0.1% FS
DPT10-M05 10kpsi MODbus 0.05% FS
DPT10-M025 10kpsi MODbus 0.025% FS
​ ​ ​ ​
DPT10-A1 10kpsi 4-20mA 0.1% FS
​ ​ ​ ​​

​
General Specifications​​​

 ​
Design life  >25 years
Design pressure  10K PSI or 15 KPSI
Hydrostatic test pressure  Design pressure x 1.5
Design temperature range  -40 to 180°C
Design depth  3000m
Hyperbaric test pressure  450bar
Design codes and standards  API 6A / 17D, ASME IX,
 ISO 13628-6, NACE MR-0175
Configuration  Single or dual pressure and
 temperature measurement*
Redundancy  True dual redundant electronics
Pressure Measurement ​
Sensing element  Piezoresistive silicon sensor
Measurement range  0 – 10KSI or 0 – 15KSI
Over-pressure  Max pressure x 1.5
Temperature range  -40 to 180°C
Accuracy  +/- 0.025% FS*
Drift  +/- 0.025% FS per annum 10 to 40°C
Temperature Measurement ​
Sensing element  PT100
Calibrated temperature range  -40 to 180°C
Accuracy  +/- 0.5C at 180°C
Drift  +/- 0.2% CR per annum at 25°C
Mechanical Specifications ​
Mechanical interface  API 6A 2 1/16"
Seal groove  BX152
Weight in air  19 kg
Flange material

10K: Duplex UNS S31803 with Inconel 625 UNS N06625 cladding in process wetted area

15K: Super Duplex UNS 532760 with Inconel 625 UNS N06625 cladding in process wetted area
Electronics Housing material 316 SS
PT sensor neck material  Inconel 625
PT sensor housing material  Inconel 718
Termination shell material  316 SS
Probe diameter  40mm
Probe length  Selectable between 100 and 300mm*
Electrical Specification ​
Supply Voltage  24VDC (18V min, 30V max)
Current consumption  <30mA @24VDC
In-rush  5A 1ms, 120% steady state current for 500ms
Output signal  CANbus (CiA443, SIIS Level 2),
 MODbus (RS485), 4-20mA

​